Amintaccen Haɗin kai Ba tare da Farko ba: TESA 6305 Acrylic Foam Tef

A cikin masana'antu na zamani, ƙarin robobi da kayan gilashi suna baje kolin Low surface makamashi (LSE) halaye, yana sa su da wuya a haɗa su tare da kaset na al'ada. Saboda, aikace-aikacen farko bisa ga al'ada ya zama mataki na wajibi amma mai ban tsoro. Farashin 6305 karya ta wannan shingen tare da sabbin abubuwa Fasaha manne LSE da tsarin kumfa mai madaidaici uku-Layi, yana kunnawa kai tsaye bonding zuwa LSE substrates ba tare da firamare, daidaita tsarin haɗin gwiwa don ingantaccen aiki.

I. Matsayin samfur

TESA 6305 a launin toka mai gefe biyu acrylic kumfa tef, An tsara shi tare da tsari mai ma'ana guda uku kuma an rufe shi a bangarorin biyu tare da m high-yi m ga LSE substrates. Ya dace da:

✔ Haɗa kayan LSE daban-daban kamar PP, PE, PMMA, da sauran robobi
✔ Tsarin hawa na kayan ado, farantin suna, murfin baya na TV
✔ Shigarwa na dindindin da ake buƙata babban matakin farko, haɗin kai na kyauta, kuma juriya zazzabi

II. Ƙididdiga na Fasaha

III. Fa'idodi guda Hudu

1. Gaskiya na Farko-Free Bonding

TESA 6305's LSE m karfi na farko tack da karshe adhesion kai tsaye a kan PP, PE, PMMA, ABS, da sauran ƙananan kayan makamashi. Yana sauƙaƙa samarwa, yana kawar da matakan farko, kuma yana rage fitar da VOC da farashi.

2. Babban Maƙarƙashiya na Farko, Yanayin Juriya

Yana manne da ƙarfi ko da a cikin ƙananan yanayin zafi ko ƙarancin matsa lamba. A cikin aiki, yana kula da haɗin gwiwa mai aminci a 80 ° C na dogon lokaci, da juriya 120 °C gajeren lokaci-mafi dacewa ga tsarin kusa da tushen zafi kamar TV da kayan aiki.

3. Damuwa da Damuwa don Dogaran Bonds

The Viscoelastic acrylic kumfa core yadda ya kamata ya sha kuma yana watsar da tsayayyen danniya da tsauri, yana hana gazawar haɗin gwiwa da ke haifar da haɓakar thermal, ƙanƙancewa, ko girgiza injina.

4. Zaɓuɓɓukan kauri da yawa don amfani mai sassauƙa

TESA 6305 yana samuwa a ciki kauri daga 400 µm zuwa 1500 µm, ba shi damar dacewa da daidaitattun matakan haɗin kai daban-daban, buƙatun cike gibin, da buƙatun kwantar da hankali a cikin masana'antu.

IV. Yanayin Aikace-aikace na al'ada

• Majalisar Kayan Aikin Gida: Hawan kayan ado na filastik akan firiji, injin wanki, da dai sauransu.

• Kayan Wutar Lantarki na Masu Amfani: TV baya panel, farantin suna, ko gaban panel bonding

• Gilashin Gilashin Shigarwa: Yin haɗin gilashin lacquered ko acrylic panels zuwa firam ɗin filastik ko ƙarfe

• Mota Mota da Smart Na'ura Housing: bonding dissimilar kayan, rage inji fasteners

• Majalisar Samfuran Masana'antu: Yana tabbatar da daidaito na gani da kuma ɓoye tsarin haɗin gwiwa

V. Tambaya&A na Fasaha

❓ Q: Za a iya amfani da TESA 6305 kai tsaye a kan PP / PE saman ba tare da firamare ba?
→ Iya. An ƙera tef ɗin musamman don kayan LSE kuma yana ba da kyakkyawar maƙarƙashiya na farko da mannewa na dogon lokaci ba tare da wani abin share fage ba.

❓ Tambaya: Shin akwai bambance-bambance a cikin aikace-aikacen tsakanin kauri da ke akwai?
→ Iya. Sigar 500µm shine madaidaicin zaɓi don haɗin ginin tsaka-tsaki. Don manyan giɓi ko ƙarin tsutsawa, 800 µm ko kauri iri iri ana ba da shawarar.

❓ Tambaya: Shin ya dace da aikace-aikacen zafin jiki kamar TV ko na'urori?
→ Lallai. Yana goyan bayan amfani na dogon lokaci a 80 ° C da juriya zafi na gajeren lokaci zuwa 120 ° C, yin shi manufa domin bonding sassa kusa da zafi kafofin.